Development of a Technological Process for Manufacturing Cast Iron Parts of the "Cover" Type by Stamping

Downloads
Published
2025-03-08
Issue
Vol. 3 No. 3 (2025): Innovative: International Multi-disciplinary Journal of Applied Technology
Article Metrics
Abstract Views 96
PDF Downloads 85
Authors

  • Davulov Shukhrat Bozarovich UZ

    Senior Lecturer, Tashkent State Technical University name Islam Karimova, Department of “Metal Technology”

  • Bozarov Mehriddin Shukhratovich UZ

    Assistant, Tashkent State Technical University name Islam Karimova, Department of “Metal Technology”

  • Faizulloev Sadullah Saifullaevich UZ

    Assistant, Tashkent State Technical University name Islam Karimova, Department of “Metal Technology”
Keywords:
stamping
Abstract

In this work, a technological process for the production of the "Cover" part by hot stamping under medium-volume production conditions is designed. The purpose of the work is to improve the technological level of production of the "Cover" part based on the analysis of the existing technological process.

How to Cite

Davulov Shukhrat Bozarovich, Bozarov Mehriddin Shukhratovich, & Faizulloev Sadullah Saifullaevich. (2025). Development of a Technological Process for Manufacturing Cast Iron Parts of the "Cover" Type by Stamping. Innovative: International Multidisciplinary Journal of Applied Technology (2995-486X), 3(3), 1-5. https://multijournals.org/index.php/innovative/article/view/3204