Analysis of Modern Corrosion Inhibitors. A Review
Article Sidebar
Main Article Content
Abstract
This review provides an outline of related literatures in which scientists and researchers used different types and procedure of corrosion inhibitors to reduce corrosion that takes place in various equipment made of alloys or metals. Different chemical inhibitors were used to reduce the rate of corrosion in various alloys. The inhibition rates ranged between 30-80% in acidic environments with different molar concentrations. The second part of this article, the laser was used as a tool to inhibit the corrosion of some alloys and under various conditions without used chemical inhibitors as an auxiliary agent. The effect of the laser pulses on the material leads to an increase in its hardness and thus its corrosion resistance. We found that the rate of inhibition reaches about 80%.
Article Details
Section
How to Cite
References
P. Maaß, Corrosion And Corrosion Protection, Wiley-Vch Verlag GmbH & Co. KGaA, 2011.
G.V. Redkina, A.S. Sergienko and Yu.I. Kuznetsov, Hydrophobic and anticorrosion properties of thin phosphonate–siloxane films formed on a laser textured zinc surface, Int. J. Corros. Scale Inhib., 2020, 9, no. 4, 1550–1563. doi: 10.17675/2305-6894-2020-9-4-23
A.I. Biryukov, O.A. Kozaderov, R.G. Galin, D.A. Zakharyevich and V.E. Zhivulin, Details of the mechanism of dissolution of iron–zinc coatings based on the δ-phase in acidic media, Int. J. Corros. Scale Inhib., 2020, 9, no. 4, 1477–1489. doi: 10.17675/2305-6894-2020-9-4-18
Yu.I. Kuznetsov, Triazoles as a class of multifunctional corrosion inhibitors. Review. Part II. 1,2,3-Benzotriazole and its derivatives. Iron and steels, Int. J. Corros. Scale Inhib., 2020, 9, no. 3, 780–811. doi: 10.17675/2305-6894-2020-9-3-1
A. Kadihum, Improvement the fatigue resistance and increase its life of specimens of naval brass alloy using laser shock wave processing, J. Nanosci. Technol., 2016, 2, no. 1, 69–726.
A. Kadhim, R.S. Jawad, N.H. Numan and R.J. Al-Azawi, Determination the wear rate by using XRF technique for Kovar alloy under lubricated condition, Int. J. Comput. Appl. Sci. (IJOCAAS), 2017, 2, no. 1, 1–5.
M. Hanoon, D.S. Zinad, A.M. Resen and A.A. Al-Amiery, Gravimetrical and surface morphology studies of corrosion inhibition effects of a 4-aminoantipyrine derivative on mild steel in a corrosive solution, Int. J. Corros. Scale Inhib., 2020, 9, no. 3, 953–966. doi: 10.17675/2305-6894-2020-9-3-10
A.A. Al-Amiery, A.A.H. Kadhum, A.B. Mohamad, A.Y. Musa and C.J. Li, Electrochemical study on newly synthesized chlorocurcumin as an inhibitor for mild steel corrosion in hydrochloric acid, Materials, 2013, 6, no. 12, 5466–5477. doi: 10.3390/ma6125466
A.A. Al-Amiery, A.A.H. Kadhum, A.B. Mohamad and S. Junaedi, A novel hydrazinecarbothioamide as a potential corrosion inhibitor for mild steel in HCl, Materials, 2013, 6, no. 4, 1420 –1431. doi: 10.3390/ma6041420
H. Herbert, H. Uhlig and R. Revie, Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering, 4th edition, John Wiley & Sons, 2008.
A. Kadihum and S.J. Raid, Spectral study of some pharmaceuticals and cosmetics, Eng. Techol. J., 2015, 33, no. 2, 172 –177.
M. Hashim, A. Kadhim and R.J. Al Azawi, Effect of laser Peening on the Microhardness and Roughness of Al-7277 alloy, Eng. Techol. J., 2019, 37, no. 10A, 404–407.
M. Hashim, R. Al-Azawi and A. Kadhim, The Q-switched Nd:YAG laser shock processing effects on mechanical properties of C86400 Cu-Zn alloy, Iraqi J. Phys. (IJP), 2019, 17, no. 42, 136–140.
A. Kadhim, S.M. Kadhim and H. Abdul Elah, Enhancement of the corrosion resistance for 6009 aluminum alloy by laser treatment, Kufa J. Eng., 2018, 9, no. 2, 202–214.
J.R. Davies, Surface Engineering for Corrosion and Wear Resistance, ASM International, 2001.
H. Ruaa, A. Azhar, M. Haleem, M.K. Hamid, A. Kadhim and R.S. Jawad, Antimicrobial Activity of TiO2 NPs against Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 25923, Int. J. Comp. Appl. Sci. (IJOCAAS), 2017, 2, no. 1, 2399–4509.
K. Emregu and E.D. Atakol, The application of some polydentate Schiff base compounds containing aminic nitrogens as corrosion inhibitors for mild steel in acidic media, Corros. Sci., 2006, 48, 3243 –3260.
A. Kadhim, S.M. Kadhim and H.A. Abduljalil, A study of LSP technique effect on the wear resistance for aluminum and copper alloy, 4th Electronic and Green Materials International Conference 2018, AIP Publishing.
A.Y. El-Etre, Inhibition of acid corrosion of carbon steel using aqueous extract of olive leaves, J. Colloid Interface Sci., 2007, 314, 578–583. doi: 10.1016/j.jcis.2007.05.077
D.E. Arthur and S.E. Abechi, Corrosion inhibition studies of mild steel using Acalypha chamaedrifolia leaves extract in hydrochloric acid medium, SN Appl. Sci., 2019, 1, no. 9, 1089. doi: 10.1007/s42452-019-1138-4
A.A. Al-Amiery and L.M. Shaker, Corrosion inhibition of mild steel using novel pyridine derivative in 1 M hydrochloric acid, Koroze Ochr. Mater. 2020, 64, no. 2, 59– 64. 10.2478/kom-2020-0009
A.J. Braihi, A.J. Jawad, A.A. Kadhum, H.S. Aljibori and A.A. Al-Amiery, Chemical resistance of NR/SBR rubber blends for surfaces corrosion protection of metallic tanks in petrochemical industries, Koroze Ochr. Mater., 2020, 64, no. 2, 65–71. doi: 10.2478/kom-2020-0010
A.A.H. Kadhum, A.B. Mohamad, L.A. Hammed, A.A. Al-Amiery, N.H. San and A.Y. Musa, Inhibition of mild steel corrosion in hydrochloric acid solution by new
coumarin, Materials, 2014, 7, no. 6, 4335–4348. doi: 10.3390/ma7064335
A.A. Al-Amiery, A.A.H. Kadhum, A. Kadihum, A.B. Mohamad, C.K. How and S. Junaedi, Inhibition of mild steel corrosion in sulfuric acid solution by new Schiff base, Materials, 2014, 7, no. 2, 787–804. doi: 10.3390/ma7020787
A.A. Al-Amiery, A.A.H. Kadhum, A.H.M. Alobaidy, A.B. Mohamad and P.S. Hoon, Novel corrosion inhibitor for mild steel in HCl, Materials, 2014, 7, no. 2, 662–672. doi: 10.3390/ma7020662